PRODUCT FINDER
Need additional assistance locating the right product for your application?
SCIGRIP® SG5000 Series Methacrylate Adhesives are high strength two-component products for bonding metals, plastics and composites. Also excellent for repairing fiberglass molds.  They offer a unique combination of convenient 1:1 mix ratio and ability to adhere to a wide variety of materials. Most metals, including steel and aluminum, can be bonded without surface pretreatment.
Note: Only the SG5000-06 BLK product is made in the US. Â All versions are available in the UK/EU
RECOMMENDATIONS & SURFACE PREP | |||
---|---|---|---|
Best | Test | Primer | Prep |
METALS | |
---|---|
Aluminum | |
Coated/Painted Metals | |
Plated Metals | |
Sheet Metal | |
Stainless Steel | |
Cold Rolled Steel |
THERMOPLASTICS | |
---|---|
ABS | |
Acrylics | |
Polycarbonates | |
Vinyls (PVC) |
THERMOSET COMPOSITES | |
---|---|
Fiberglass | |
Gelcoats | |
SMC & BMC | |
RTM & RTM Light |
Adhesive | Gap Fill Inch (mm) | Working Time min. | Fixture Time |
---|---|---|---|
SG5000-03 | 0.02-0.5 (0.50-12.7) | 2-5 | 6-8 |
SG5000-06 | 0.02-0.5 (0.50-12.7) | 5-8 | 10-12 |
SG5000-13 | 0.02-0.5 (0.50-12.7) | 14-19 | 20-25 |
Adhesive | Ratio A:B Volume Weight | ||
---|---|---|---|
SG5000-03 | 1:1 | ||
SG5000-06 | 1:1 | ||
SG5000-13 | 1:1 |
Adhesive | Tensile Strength psi (MPa) %Elongation | Shear Strength psi (MPa) |
---|---|---|
SG5000-03 | 5,076-5,802 (35-40) 5-10 | 2,611-3,626 |
SG5000-06 | 5,076-5,802 (35-40) 5-10 | (18-25) |
SG5000-13 | 5,076-5,802 (35-40) 5-10 |
This SCIGRIP product is GREENGUARD certified for low chemical emissions |
IPS Adhesives
600 Ellis Road
Durham, NC 27703 USA
Tel: 919 598 2400
Fax: 919 598 2434
Email: info@scigrip-americas.com
IPS Adhesives
New York Way,
New York Industrial Park,
Newcastle upon Tyne,
NE27 0QF (UK)
Tel: +44 (0) 191 2590033
Fax: +44 (0) 191 2574525
Email: eu.sales@ipsadhesives.com
© 2023 IPS Corporation. All Rights Reserved.
Need additional assistance locating the right product for your application?