RECOMMENDED FOR
UV Resistance
PRODUCTION


Description
SCIGRIP® SG100 Series Methacrylate Adhesives are two-component, 10:1 mix ratio products for bonding thermoplastics, metals, composites and combinations thereof. These bright white, UV resistant products are particularly well suited in color critical applications without compromising physical properties.
Features & Benefits
- Choice of 15 & 40 minute working times
- UV resistant
- Non-sag handling characteristics facilitates application on non-level surfaces
- Excellent environmental resistance
- Excellent fatigue, impact and shock load resistance
- All metals need primer
RECOMMENDATIONS & SURFACE PREP | |||
---|---|---|---|
![]() Best | ![]() Test | ![]() Primer | ![]() Prep |
METALS | |
---|---|
Aluminum | ![]() |
Coated/Painted Metals | ![]() |
Plated Metals | ![]() |
Sheet Metal | ![]() |
Stainless Steel | ![]() |
Cold Rolled Steel | ![]() |
THERMOPLASTICS | |
---|---|
ABS | ![]() |
Acrylics | ![]() |
Vinyls (PVC) | ![]() |
THERMOSET COMPOSITES | |
---|---|
Fiberglass | ![]() |
Gelcoats | ![]() |
RTM & RTM Light | ![]() |
What Are You Bonding Together?
SPECIFICATIONS & AVAILABILITY
Working Times
Adhesive | Gap Fill Inch (mm) | Working Time min. | Fixture Time |
---|---|---|---|
SG100-15 | 0.02-0.5 (0.50-12.7) | 12-18 | 30-45 |
SG100-40 | 0.02-0.5 (0.50-12.7) | 35-45 | 80-100 |
Typical Adhesive Properties
Adhesive | Ratio A:B by Volume | ||
---|---|---|---|
SG100-15 | 10:1 | ||
SG100-40 | 10:1 |
Typical Cured Properties
Adhesive | Tensile Strength psi (MPa) %Elongation | Shear Strength psi (MPa) |
---|---|---|
SG100-15 | 2,500-2,900
(17.2-20)
80-120 | 2,000-2,400 (14-16) |
SG100-40 | 2,500-2,900 (17.2-20)
80-120 | 2,000-2,400 (14-16)
|
Availability & Handling

Product Certifications
![]() | |
---|---|
This SCIGRIP product is GREENGUARD certified for low chemical emissions |