PRODUCT FINDER
Need additional assistance locating the right product for your application?
RECOMMENDED FOR
Large Structures
PRODUCTION
Description
SG230HVA is a 10:1 MMA-based, high viscosity adhesive with an excellent balance of strength and toughness for bonding a wide range of substrates with little to no surface preparation.
Features & Benefits
- Choice of working times – 40, 60, and 90 minutes
- Excellent choice for bonding FRP composites with little or no surface preparation
- Outstanding sag resistance
- Excellent fatigue, impact and shock load resistance
- Outstanding environmental and chemical resistance
- Bonds a range of substrates: Acrylic, PVC, Thermoset Composites (Vinylester, Polyester, Gelcoats, and Epoxy), Primed Metals
- All metals require a primer
RECOMMENDATIONS & SURFACE PREP | |||
|---|---|---|---|
 Best |  Test |  Primer |  Prep |
METALS | |
|---|---|
Aluminum | |
Coated/Painted Metals | |
Plated Metals | |
Sheet Metal | |
Stainless Steel | |
Cold Rolled Steel | |
THERMOPLASTICS | |
|---|---|
Acrylics | |
Vinyls (PVC) | |
THERMOSET COMPOSITES | |
|---|---|
Fiberglass | |
Gelcoats | |
RTM & RTM Light | |
What Are You Bonding Together?
SPECIFICATIONS & AVAILABILITY
Working Times
Adhesive | Gap Fill Inch (mm) | Working Time min. | Fixture Time |
|---|---|---|---|
SG230HV | 0.02-2 (0.50-50) | 25-130 | 45-312 |
Typical Physical Properties
Adhesive | Ratio A:B Volume Weight | ||
|---|---|---|---|
SG230HV | 10:1 |
Typical Cured Properties
Adhesive | Tensile Strength psi (MPa) %Elongation | Shear Strength psi (MPa) |
|---|---|---|
SG230HV | 3,000-3,500 (21-24)
100-150% | 2,200-2,500 (15-17) |
Product Certifications
 |  |  | |
|---|---|---|---|
American Bureau of Shipping (ABS) Certification
Evaluated relevant manufacturing and design certifications of quality procedures for SCIGRIP products. | Lloyds Register Certified
SG230 Type Approval ensuring products conform to recognised industry quality standard. | This SCIGRIP product is GREENGUARD certified for low chemical emissions |
